文章摘要
锌浸出渣中银浮选工艺优化工业试验
Industrial Test on Process Optimization for Silver Flotation from Zinc-leached Residues
投稿时间:2017-08-25  
DOI:
中文关键词: 有色金属冶金  锌浸出渣    浮选效率  工艺优化  工业试验
英文关键词: nonferrous metallurgy  zinc-leached residues  silver  flotation  process optimization  industrial test
基金项目:河南省高等学校重点科研项目(45B0001,提高锌酸浸渣中银浮选回收率的工艺优化研究与实践)。
作者单位E-mail
王红伟 济源职业技术学院河南 济源 459000 mhstone@163.com 
杜新玲 济源职业技术学院河南 济源 459000  
何意 河南豫光锌业有限公司河南 济源459000  
马科友 济源职业技术学院河南 济源 459000  
摘要点击次数: 117
全文下载次数: 145
中文摘要:
      基于前期的实验室研究,对河南某锌冶炼厂低酸浸出渣浮选回收银浮选优化工艺进行了工业试验。采用原生产流程,调整优化生产现场矿浆浓度(保持在30%以上)和药剂制度(采用Z-200作辅助捕收剂,活性炭为载体,不再添加黄药)、工艺设备及其工作参数后进行了工业试验。结果表明,工艺优化后,银精矿品位由3000 g/t提高至6740.4 g/t,银回收率由60%~64%提高到73.17%;精矿产率降低到原工艺的三分之一,减少了银精矿所带走的锌损失;精矿中金品位由1.5 g/t提高到5.3 g/t以上,提高了金的回收率。
英文摘要:
      Based on the previous laboratory results, an industrial test was carried out on the process optimization for silver flotation from low acid-leached residues of some zinc hydrometallurgy factory in Henan. Adopting the original production process, we adjusted and optimized the pulp density, reagent system, process equipment and its working parameters on the production site. The pulp density was kept above 30% and the reagent system consisted of Z-200 as the auxiliary collector and activated carbon as the vector. No more butyl xanthate was added into the system. The test showed that, after the process optimization, the silver concentrate grade was elevated from about 3000 to 6740.4 g/t and the recovery rose to 73.17% from 60%~64%. Meanwhile, the silver concentrate amount was cut by about 66.6%, which greatly reduced zinc loss, in return. Moreover the gold concentrate grade was increased from 1.5 to 5.3 g/t, and the gold recovery was improved.
查看全文   查看/发表评论  下载PDF阅读器
关闭